Arbor stuck on your Taig?

Sometimes, when using the Taig arbor for tool holding during heavy cuts, and especially
an interrupted cut, the arbor will become really tight.  I don't want to resort to using a pipe
wrench, or some other medieval tool on my arbors, so...



Go get yourself a vacuum cleaner belt,



Pinch it around the arbor, and wrap the remaining belt around itself,



And it will give you a good non slip surface to grab and loosen the arbor.



More (Taig) lathe projects


deansphotographica.com  (home page)



copyright Dean Williams
6/07